SMG Stainless Steel H-Type Glass Door Handle

What's in the Box

• 1 outside handle
• 1 inside handle
• Steel connecting stems
• Silicone washers and gaskets
• Hex key

Installation Guide

1. Give your glass fabricator the hole centres (302 mm or 450 mm) before the glass is toughened. Drilling toughened glass afterwards will shatter it.
2. Push the steel stems through the glass holes with the silicone washers seated on both faces.
3. Fit the outside handle and then the inside handle onto the stems.
4. Tighten the grub screws evenly with the hex key until both handles are firm. Do not overtighten against the glass.
5. Pull and push the door a few times to confirm there is no play.

Care & Maintenance

• Wipe with a soft cloth and mild soapy water. Avoid abrasive pads, which scratch the satin finish.
• Re-tighten the grub screws now and then on high-traffic doors.

Good to Know

• The glass, floor spring, patch fittings and locks are sold separately.
• The handles are finished units and cannot be shortened on site, so choose the size before ordering.

Frequently Asked Questions

What do 302 mm and 450 mm mean?

They are the distances between the two mounting holes in the glass. The 457 mm handle needs 302 mm centres and the 600 mm handle needs 450 mm centres.

Does one set cover both sides of the door?

Yes. Each set has an inside and an outside handle that bolt together through the same holes.

What glass thickness do they fit?

8–12 mm toughened glass.

Will they rust?

SS 304 resists rust well indoors and at covered entrances. Clean with mild products only.

Why Buy from VendorBazaar

• 100% genuine, brand-sourced products
• Competitive prices on top brands
• Secure checkout and pan-India delivery
• Expert support for contractors, interior designers and homeowners